- 21. Clamshell Unboxing Part 3: Accessories Box
- (Trivia)
- ... the YoYo, with a power cord which is aligned to your country. You will find also a modem cable in the purchased parts package. In some countries an extra adapter is supplied. The firewire Clamshell ...
- 22. 466 SE Indigo "Cybook
- (Hardware hints)
- ... Module that came w/my mouse) 20-22Ga Wire (I used old phone cord and a USB-b cable) SPST Switch(I used a DPDT) 2x W117SIP-6 Magnecraft 5v Relays. 1x 47Ohm 1/8W 5% Resistor I still wanted ...
- 23. 1024x768 TFT in a Clamshell
- (Hardware hints)
- If you want a nice tuning up for your iBook Clamshell take a look at the screen mod thread (1024x768) at MacNNforums. The main problem was to find a suitable screen/cable combination and modified in ...
- 24. Small Clamshell Movie Theater
- (Accessories)
- ... also has a composite video input marked in yellow, so that the original Apple connection cable can be plugged in directly. However, there is one limitation: the image quality of a composite signal is visibly ...
- 25. My Powerberry 466MHz Firewire Mod
- (Hardware hints)
- ... this feature was already being prepared, but was postponed to the next edition for cost reasons. Since all clamshell iBooks are based on the same circuit board layout, all interfaces, cable connections ...
- 26. Buy Clamshell from overseas
- (Hardware hints)
- ... cable for around 6 euros here in Germany. The YoYo power supply also runs with the 220V that is usual in Germany. Cheap shipping via USPS Before the end of the auction, ask the seller whether shipping ...
- 27. Clamshell Purchase Advisor
- (Hardware hints)
- ... Used replacement power packs are available from 25 euros. - Ask if the original equipment is present, including box, modem/AV cable, manuals and OS8 or OS9 operating system CDs. Some sellers install a ...
- 28. USB Port specification
- (Hardware hints)
- ... In high-speed mode up to 12 Mbit (with shielded cables) CD / DVD burners can only be operated at low burning speeds via USB. Pin assignment of the USB port Pin Signal Description 1VCC +5VDC 2 D ...